02-09-2023, 08:43 AM
Beta 1.1.068
Issues found:
1. In Port filter sub page doesn't display USB D3 and D4, was like this on official firmware too
2. Out Port filter sub page doesn't display P05-12, was like this on official firmware too.
3. When pressing up/down from the matrix page, the display shows the additional inputs/ouputs of PC and USB, but then activating a new output doesn’t update the screen correctly, it glitches and shows incorrect info. I think when you select a USB or pc input, the matrix should display that sub matrix automatically and pressing the encoder can return you to the normal view.
Feature request:
1. Display Input and output name upon button press from the main routing matrix page
2. When assigning input names inside MRCC allow us to rename inputs in PC and any DAW, pass names to PC/Mac please.
3. Show what inputs are active on the preset with dimly lit LED’s similar to how you show outputs that are active but not currently selected.
4. Midi monitor screen should record more note/event data and be scrollable so we can see what was received, also a clear screen option. Helpful for troubleshooting.
5. On routing screen, it shows incoming data, but there is no way to control which data is shown in such a small space, so if you have lots of data coming in, you dont see it if the MRCC has chosen to show some other data. Can the MRCC display the data associated with the tab stopped icon? Example: So when you are tab stopped on the clock icon, it shows if that input is sending clock, if tab stopped on the note icon, it shows what note was received, if not tab stopped on an icon, it shows the current way it displays but also please provide us with info on how it prioritizes what data its showing, this is helpful with troubleshooting.
Issues found:
1. In Port filter sub page doesn't display USB D3 and D4, was like this on official firmware too
2. Out Port filter sub page doesn't display P05-12, was like this on official firmware too.
3. When pressing up/down from the matrix page, the display shows the additional inputs/ouputs of PC and USB, but then activating a new output doesn’t update the screen correctly, it glitches and shows incorrect info. I think when you select a USB or pc input, the matrix should display that sub matrix automatically and pressing the encoder can return you to the normal view.
Feature request:
1. Display Input and output name upon button press from the main routing matrix page
2. When assigning input names inside MRCC allow us to rename inputs in PC and any DAW, pass names to PC/Mac please.
3. Show what inputs are active on the preset with dimly lit LED’s similar to how you show outputs that are active but not currently selected.
4. Midi monitor screen should record more note/event data and be scrollable so we can see what was received, also a clear screen option. Helpful for troubleshooting.
5. On routing screen, it shows incoming data, but there is no way to control which data is shown in such a small space, so if you have lots of data coming in, you dont see it if the MRCC has chosen to show some other data. Can the MRCC display the data associated with the tab stopped icon? Example: So when you are tab stopped on the clock icon, it shows if that input is sending clock, if tab stopped on the note icon, it shows what note was received, if not tab stopped on an icon, it shows the current way it displays but also please provide us with info on how it prioritizes what data its showing, this is helpful with troubleshooting.